Fixed quote after a free call

Freight invoice automation with accessorials and evidence

Billing usually waits on paperwork and then rushes at week end. We build a workflow that gathers delivered loads with clean PODs, applies the agreed rate and each customer's fuel surcharge method, lists detention, extra stops and lumper charges with the timestamps and receipts behind them, and prepares a draft invoice in QuickBooks Online, Xero or your TMS for billing to approve. A typical build costs $1,000 to $2,500 and takes about four weeks.

The problem

Why freight billing waits and accessorials go missing

Every customer bills differently. One wants weekly statements with PODs attached, another wants an invoice per load through a portal, a third has its own fuel surcharge table. Detention depends on arrival and departure times that sit in driver notes or telematics, and lumper receipts arrive as photos.

When this is pieced together by hand, some accessorials are never charged and others are disputed because the evidence is missing. Owner-operator and partner carrier settlements wait on the same paperwork.

What we build

What our freight invoice automation includes

Ready-to-bill list

Delivered loads with a clean POD gathered per customer, with anything missing listed separately.

Rates and fuel surcharge

Agreed lane rates applied and the fuel surcharge calculated with each customer's agreed method and index.

Accessorials with evidence

Detention, extra stops, layovers and lumper charges listed with the arrival and departure times or receipts behind them.

Draft invoices

Invoices created as drafts in QuickBooks Online, Xero or your TMS, with PODs attached where the customer requires them.

Carrier settlements

Draft settlements for owner-operators and partner carriers from the same delivered loads.

Disputes and ageing

Short-paid invoices and disputes logged against the load with the evidence, and an ageing summary for management.

Who does what

Automation does the chasing, people make the calls.

Every step is marked: what runs on its own, what a member of staff reviews and what stays with a person who decides.
  1. 01 Automated

    Load delivered

    A clean POD marks the load ready to bill.

  2. 02 Automated

    Charges built

    Rate, fuel surcharge and accessorials with evidence are assembled.

  3. 03 Automated

    Draft created

    A draft invoice and any carrier settlement are prepared.

  4. 04 Office review

    Billing reviews

    Billing checks charges, removes anything unsupported and approves.

  5. 05 Dispatcher or safety manager decides

    Rates and credits

    Rate changes, credit notes and disputed charges are decided by management.

How it behaves

How freight invoicing behaves

What each person sees and what runs in the background, including what happens when something goes wrong.

What the customer sees

  • Invoices that arrive sooner after delivery
  • Accessorials listed with their evidence
  • PODs attached when their terms require it

What billing sees

  • A ready-to-bill list and a list of loads still missing paperwork
  • Draft invoices and settlements to approve
  • A dispute log and an ageing summary

What the automation does

  • Applies agreed rates and surcharge methods
  • Collects timestamps and receipts for accessorials
  • Never sends an invoice without approval

Edge cases and fallbacks

Rate on the load differs from the confirmation
Flagged to billing rather than picked automatically.
Detention claimed without timestamps
Listed as unsupported for billing to decide.
Customer requires a portal upload
Invoice package prepared and a task created for billing.
Accounting API outage
Drafts are held and retried, and billing is alerted.

Architecture

Freight invoicing with accessorials at a glance.

The setup we usually start from. We adapt it to the phone system and practice software you already use.
TMS loads Delivered, POD in Telematics Arrive and depart n8n workflow Assemble charges Customer terms Rates, surcharge Draft invoice QuickBooks or Xero Billing Approves
  • Input
  • Logic and services
  • Data
  • Output
  • People

How it flows

  1. 1 Delivered loads with a clean POD and arrival and departure times are collected.
  2. 2 Each customer's rates, fuel surcharge method and accessorial terms are applied.
  3. 3 A draft invoice with evidence, and any carrier settlement, is created in the accounting system.
  4. 4 Billing reviews and approves before anything is sent.

Project planner

How the project runs, phase by phase.

Typical durations for a first version. Your proposal lists the exact phases, dates and what you sign off at each step.

Freight invoicing, accessorials & settlements project plan

Typical time to launch: about 4 weeks, then support

  1. 01

    Discovery

    2 to 3 days

    Billing rules per customer, surcharge methods, accessorial evidence and accounting system access.

  2. 02

    Design

    2 to 3 days

    Charge logic, evidence rules, draft layout and settlement rules.

  3. 03

    Build

    1 to 2 weeks

    Ready-to-bill list, charge assembly, drafts and dispute log.

  4. 04

    Shadow run

    About 1 week

    Drafts built for a real billing cycle and compared with billing's own invoices.

  5. 05

    Launch

    1 to 2 days

    Switch on for the largest customers first.

  6. 06

    Support

    Ongoing

    New customer terms and surcharge table updates.

What it runs on

Real products only, connected through the access each vendor provides. See all integrations

n8n QuickBooks Online API (invoices and attachments) Xero Accounting API Your TMS API or export Samsara, Motive or Geotab for arrival and departure times

Cost estimate

What it costs, line by line.

Estimates to plan with. Your fixed quote follows a free call, once we have seen your systems and volumes.
  • Discovery and design

    Billing rules, surcharge methods and evidence rules.

    $250 – $450

  • Build

    Charge assembly, drafts, settlements and dispute log.

    $450 – $1,250

  • Integrations

    TMS, telematics and accounting system.

    $150 – $400

  • Testing and shadow run

    One billing cycle compared side by side.

    $100 – $250

  • Launch and training

    Switch-on and billing walkthrough.

    $50 – $150

  • Total project estimate

    $1,000 – $2,500

Optional monthly care after launch is quoted with your proposal. Fixed quote after a free call. Customer portal submissions or EDI 210 invoices may need a second workflow. Accounting and n8n plans are billed to you directly.

Monthly running costs you pay directly

Estimates from the vendors' published pricing, checked November 2026. Billed to you by each vendor, never marked up.

  • Accounting software: Your QuickBooks Online or Xero plan.
  • n8n: Self-hosted Community edition, or n8n Cloud from about €20 a month (Starter, billed annually).

What pushes cost up

  • Systems without an API, or with integration access that must be requested from the vendor
  • Writing data back into your core system rather than only reading from it
  • Several locations, brands or very different processes to support
  • Custom apps, dashboards or a voice line on top of the workflows

What keeps cost down

  • One location and one clear process to start with
  • Cloud software with a documented API
  • Using tools you already pay for instead of adding new ones
  • Approved wording and sample data ready at the start
Get a fixed quote

Privacy and consent

Rules we design for, with the sources.

General information to plan with, not legal advice. Your counsel or data protection adviser confirms what applies to your practice.

Billing decisions stay with people

Automation applies the terms you already agreed; it never invents a charge, and billing approves every invoice.

Location data used for its purpose

Arrival and departure times are used only to support agreed accessorials, in line with what drivers were told when the data was collected.

Source: gdpr-info.eu

US: keep supporting documents

Delivery documents can also count as supporting documents for hours-of-service records, which carriers keep for at least six months.

Source: www.law.cornell.edu

How we deliver

Agile delivery, in 1 to 2 week sprints.

We deliver in short Agile sprints using Scrum, so you see working software every one or two weeks instead of waiting for a big reveal at the end.

Every sprint

  1. 1 Sprint planning. At the start of each sprint we agree which backlog items we will finish, each with written acceptance criteria you can check.
  2. 2 Daily stand-up. A short internal check-in on progress and blockers. You get a written update in your Slack or Teams channel, not another meeting.
  3. 3 Sprint review and demo. At the end of each sprint we demo what was built on test data or in a shadow run, and you accept it or ask for changes.
  4. 4 Retrospective. The team looks at what went well and what to change in the next sprint, and we share anything that affects you.

How scope stays under control

Product backlog
Every feature, fix and question in one prioritised list you can see at any time.
Acceptance criteria
Plain-language conditions for "done" on each item, agreed before work starts.
Change requests
New ideas go into the backlog with an estimate. Nothing changes scope or price without your written approval.
User acceptance testing (UAT)
Before launch your team tests the real workflow against the acceptance criteria and signs off.

Tools we use

Jira, ClickUp or Trello for the backlogSlack or Microsoft Teams for updatesGitHub for code and version historyLoom or a live call for demos

Project manager / Scrum master

Runs the sprints, keeps the backlog and timeline honest, and is your single point of contact.

Business analyst

Maps how the work runs today, writes the workflow specification and acceptance criteria with your team.

Automation engineer

Builds the n8n workflows, integrations, AI steps and error handling.

Backend developer

Writes custom code where a no-code step is not enough: APIs, data sync, secure storage.

Frontend / mobile developer

Builds forms, booking pages, dashboards, web apps or Android apps when the project needs them.

QA engineer

Tests every workflow against the acceptance criteria, including edge cases and failure paths.

DevOps engineer

Sets up hosting, access, backups, monitoring and alerts, and the deployment pipeline.

Who does what at each phase

Free call
Project manager, business analyst
Understand the problem, check it is worth automating and outline a rough range.
Discovery
Business analyst, automation engineer
Map the current process, systems and data, and agree success measures.
Design
Business analyst, automation engineer, backend developer
Write the workflow specification, data flows, compliance notes and backlog with acceptance criteria.
Sprints
Automation engineer, developers, QA
Build, test and demo in 1 to 2 week sprints; you accept or adjust after each demo.
UAT and launch
QA, DevOps, project manager
Your team tests and signs off, we switch on, monitor closely and train the team.
Support
Automation engineer, DevOps
Stabilisation window, then optional monthly care with monitoring and changes.

A point of contact

One person who can answer questions and approve decisions, with about an hour a week during the project.

Access

Admin or API access to the systems involved, created as separate accounts with the least access needed.

Sample data

Real but non-sensitive records (or de-identified ones) so we can design and test against reality.

Approved wording

Message templates, policies and consent wording (for SMS, your opt-in and opt-out text) reviewed by you.

Vendor agreements

Signed agreements with the software vendors that will handle personal data, such as a BAA or processor contract.

Time for testing

A few hours from the people who will use the system, for the demos and user acceptance testing.

Working system

Workflows, integrations and any apps running in your accounts, under your keys.

Documentation

Workflow specification, data-flow map, run book and exported workflow files.

Training

A walkthrough for the team and a short recorded video for new starters.

Handover

All access, credentials and code handed over; you can keep us or take it in-house.

Stabilisation window

Fixes for anything that does not meet the agreed acceptance criteria after launch.

Support options after launch

  • No plan

    You run it yourselves after the stabilisation window and contact us when you need a change.

  • Monthly care

    Monitoring, error alerts, small changes and updates each month, with an agreed response time.

  • Priority care

    Faster response times for business-critical workflows and a monthly review call.

How a project moves through our team

Free call PM and analyst Discovery Process and data Design Spec and backlog Sprints Build, test, demo Your review Accept or adjust UAT and launch Sign-off, go live Support Monitor and improve
  • Input
  • Logic and services
  • People
  • Output
  • Data

How it flows

  1. 1 A free call with the project manager and business analyst to understand the problem and whether it is worth building.
  2. 2 Discovery and design produce a written specification, data-flow map and a backlog with acceptance criteria.
  3. 3 The team builds in 1 to 2 week sprints; you review a demo at the end of each and accept or adjust.
  4. 4 Your team runs user acceptance testing, we launch, then monitor and improve under a support plan.

FAQ

Freight invoicing, accessorials & settlements questions, answered.

Turning delivered loads into draft invoices: rate, fuel surcharge, accessorials with evidence and PODs attached, plus carrier settlements. Billing still approves every invoice.

It can calculate detention from arrival and departure times against each customer's free time and rate, and attach the evidence. Billing decides whether to charge it.

Freight audit usually means a shipper checking carrier invoices. Our workflow is for carriers and brokers billing their customers, though brokers can use the same checks on incoming carrier invoices.

QuickBooks Online through its API, including attachments, and Xero through its Accounting API. TMS billing modules are connected where they offer an API or import.

It can prepare the invoice and POD package your factoring company asks for. Submission routes differ by factor and are confirmed per project.

Days from delivery to invoice, accessorials billed per load, disputes and short-pays, and settlement turnaround for carriers.

Free 20-minute call

Want this for your logistics & haulage?

Book a free 20-minute call. We will look at how the work runs today, tell you honestly whether it is worth building and give you a fixed quote if it is.

Book a free 20-minute call